Cedar Saunas
Wednesday, July 6th, 2011
Creating An Outdoor Sauna
For centuries the Finns and other cultures have been creating their very own saunas granted for most of this time simple dugouts were the type of option. Today’s modern home has much higher standards no one wants to crawl inside a dark hole in the earth to have a sauna bath anymore. Well today it is simple to Build Your Own Sauna both indoors or outdoors.
The first step will be to decide on the dimension and the location of your sauna. Will it be inside or out? Will it be a 1 person, two or more? What kind of heat supply do you want to use? An outdoor sauna will require more engineering because it will have to be structurally sound weather proof and properly insulated. The common building of an outdoor sauna is with Cedar. Cedar is broadly used because it's extremely resistant to rot and may tolerated the high moisture levels associated with a sauna. Cedar is usually the first option it isn't the one choice when it comes to a sauna actually any material that can with stand the high temperature and high moister level can be used material such as fiberglass and acrylic panels can be utilized also. You may want to line your sauna with Cedar and have the outdoors match the siding in your home.
Prior to you start constructing your outdoor sauna consult with your local township building division you might or might not require a building permit. Usually the construction of the outside sauna will be both on an existing cement slab or on a deck. The ground should be insulated if building on a slab build a elevated ground to make room for insulation. The walls will be typical sixteen inch on middle standard stud building. You can use a regular pre hung door or build a customized cedar door it is a matter of individual preference. Generally the roof is done with a rafter technique with a metal or shingled roof.
Once the shell is completed you can set up the outdoors siding the siding could be stained or natural Cedar or you can match the siding of your home. Following the siding has been installed you can insulate the walls and ceiling the insulation will reduce operating expenses and allow for a quicker warm up of the sauna.
The last step is to finish off the interior most prefer Cedar for this it is a good choice because it naturally is resistant to mold and mildew that can be related with a sauna, it also smells and appears great. After the interior has been finished you will need to install the heater you've four basic choices when it comes to heaters electrical, infrared, natural gas and propane and wood burning, each have benefits and disadvantages you will need to decide which heater is correct for your application.
If you want more information on Infrared Sauna, don't read just rehashed articles online to avoid getting ripped off.
Go here: Infrared Saunas
World Finest Cedar Saunas - Northern Lights Cedar Tubs & Saunas
.
Thanks for visiting our website. I hope you find the Cedar Saunas information that you are looking for.
 |
No items matching your keywords were found.